Puqpress Uniplate for M2 and M6 Tampers

The Puqpress Uniplate is a thin steel plate that fits on top of a Puqpress M2 or M6 tamper so that a grinder other than the one it was made for can sit on it. Choose the plate for the tamper you own, in Black or White to match.

How Puqpress M-series tampers work

Puqpress M-series tampers sit underneath the grinder rather than next to it. The top of each tamper is shaped to match the base of one particular grinder, so the grinder stands on the tamper and the portafilter is filled from the grinder spout and tamped in the same spot. That is what saves the counter space. It also means that, as standard, each M-series tamper only fits the grinder it was made for:

• M2: Victoria Arduino and Nuova Simonelli Mythos One and Mythos II
• M3: Mahlkönig E65S and E65S GbW
• M4: Fiorenzato F64 and F83
• M5: Mahlkönig E80S and E80S GbW
• M6: Victoria Arduino Mythos MY75 and MY85

If you have, or move to, a different grinder, you do not need a new tamper. You add a Uniplate (for the M2 and M6) or a Bracket (for the M3, M4 and M5), which gives the tamper a universal top that other grinders can sit on.

What the Uniplate does

The M2 and M6 are wide, low tampers, so all they need to carry a different grinder is a flat top. The Uniplate is that top: a 2mm powder-coated steel plate that fixes over the tamper in a few minutes without tools. The grinder stands on the plate, level and stable, and the grind-to-tamp workflow carries on exactly as before.

Which one do I need?

• M2 Uniplate, for a Puqpress M2. Puqpress list it as fitting Markibar Izaga and OHRI, Anfim Luna, Alba, Scody, SP II and Caimano, and Slingshot Sisma and Talis, plus many other grinders with a similar base.
• M6 Uniplate, for a Puqpress M6. Fits the same Markibar, Anfim and Slingshot grinders, plus the La Marzocco Jay.

Pick by the tamper, not the grinder. If your tamper is an M3, M4 or M5 you need a Puqpress Bracket instead, because those tampers are taller and narrower and need a frame rather than a plate. If you are not sure whether your grinder will fit, contact us with the model before ordering.

• Lets a Puqpress M2 or M6 work with grinders other than the Mythos
• Keeps the space-saving under-grinder stack
• 2mm powder-coated steel, under 1kg
• Fits in minutes, no tools, no modification to tamper or grinder
• Black or White to match the tamper

Technical Data:
M2 Uniplate: 38 x 18 x 0.2 cm, 0.96kg
M6 Uniplate: 37.5 x 19.5 x 0.2 cm, 0.96kg
Material: Powder-coated steel